|
|
CFD simulation of fluid-induced vibration
Kubíček, Radek ; Vondál, Jiří (referee) ; Buzík, Jiří (advisor)
The presented diploma thesis focuses on flow-induced vibrations of a tube. The main aim and benefit is the analysis of tube stiffness in contact with the other one and the following use of obtained values and characteristics in CFD simulations. The work can be divided into three parts. The first part is about the current state of knowledge of flow-induced vibrations. It introduces the basic mechanisms of vibration and methods for their suppression. The second part deals with the determination of stiffness of defined geometry tube including the collision with the other tube. The final part demonstrates and evaluates the application of obtained characteristics in CFD simulations.
|
|
|
Checking of heat exchanger to flow-induced vibration
Mazura, František ; Pernica, Marek (referee) ; Buzík, Jiří (advisor)
This bachelor thesis focuses on the thermal-hydraulic design of the heat exchanger and flow induced vibrations checking. The introductory part describes the basic distribution and function of heat exchangers. The next part introduces the thermal-hydraulic design in the Python programming language using the Kern‘s method for an U-tube heat exchanger. Thermal-hydraulic design outputs are compared with values from HTRI software. Subsequently, the issue of the flow induced vibrations is characterized and the checking of these vibrations according to the normalized TEMA standard is performed. Finally, the heat exchanger is checked using the Poddar & Polley graphical method.
|
|
|
Flow Induced Vibration Fatigue Analysis of Tube Bundle
Buzík, Jiří ; Vincour, Dušan (referee) ; Lukavský, Jiří (referee) ; Vejvoda, Stanislav (advisor)
The aim of the dissertation thesis is the control of the tube bundle on the cyclic fatigue caused by the flow past tube bundle. Fatigue due to flow is caused by flow-induced vibrations. Examined vibrations are caused by the mutual interaction of two phases (solid and liquid). The present work is focused mainly on the interaction of tube bundles with fluid. The current level of knowledge in this field allows to predict mainly static respectively quazi-static loading. These predictions are based on methods of comparing key vibration variables such as frequencies, amplitudes or speeds (see TEMA [1]). In this way, it is possible to determine quickly and relatively precisely the occurrence of a vibrational phenomenon, but it is not possible to quantitatively assess the effect of these vibrations on the damage of to the tube beam and to predict its lifespan, which would require the determination of the temperature field and the distribution of forces from the fluid on the beam. The aim of the work is to evaluate the-state-of-the-art, to perform a numerical simulation of the flow of fluids in the area of shell side under the inlet nozzle. Current methods of numerical analyses very well solve this problem, but at the expense of computing time, devices and expensive licences. The benefit of this work is the use of user-defined function (UDF) as a method for simulating interaction with fluid and structure in ANSYS Fluent software. This work places great emphasis on using the current state of knowledge for verifying and validation. Verifying and validation of results include, for example, experimentally measured Reynolds and Strouhal numbers, the drag coefficients and for example magnitude of pressure coefficient around the tube. At the same time, it uses the finite element method as a tool for the stress-strain calculation of a key part on tube such as a pipe-tube joint. Another benefit of this work is the extension of the graphical design of heat exchanger according to Poddar and Polley by vibration damages control according to the method described in TEMA [1]. In this section, the author points out the enormous influence of flow velocity on both the tube side and the shell side for design of the heat exchanger to ensure faultless operation. As an etalon of damage, the author chose a heat exchanger designated 104 from the Heat Exchanger Tube Vibration Data Bank [3]. With this heat exchanger, vibrational damage has been proven to be due to cutting of the tubes over the baffles. The last part outlines the possibilities and limits of further work.
|
|
|
CFD simulation of fluid-induced vibration
Kubíček, Radek ; Vondál, Jiří (referee) ; Buzík, Jiří (advisor)
The presented diploma thesis focuses on flow-induced vibrations of a tube. The main aim and benefit is the analysis of tube stiffness in contact with the other one and the following use of obtained values and characteristics in CFD simulations. The work can be divided into three parts. The first part is about the current state of knowledge of flow-induced vibrations. It introduces the basic mechanisms of vibration and methods for their suppression. The second part deals with the determination of stiffness of defined geometry tube including the collision with the other tube. The final part demonstrates and evaluates the application of obtained characteristics in CFD simulations.
|
|
|
Checking of heat exchanger to flow-induced vibration
Mazura, František ; Pernica, Marek (referee) ; Buzík, Jiří (advisor)
This bachelor thesis focuses on the thermal-hydraulic design of the heat exchanger and flow induced vibrations checking. The introductory part describes the basic distribution and function of heat exchangers. The next part introduces the thermal-hydraulic design in the Python programming language using the Kern‘s method for an U-tube heat exchanger. Thermal-hydraulic design outputs are compared with values from HTRI software. Subsequently, the issue of the flow induced vibrations is characterized and the checking of these vibrations according to the normalized TEMA standard is performed. Finally, the heat exchanger is checked using the Poddar & Polley graphical method.
|
|
|
Flow Induced Vibration Fatigue Analysis of Tube Bundle
Buzík, Jiří ; Vincour, Dušan (referee) ; Lukavský, Jiří (referee) ; Vejvoda, Stanislav (advisor)
The aim of the dissertation thesis is the control of the tube bundle on the cyclic fatigue caused by the flow past tube bundle. Fatigue due to flow is caused by flow-induced vibrations. Examined vibrations are caused by the mutual interaction of two phases (solid and liquid). The present work is focused mainly on the interaction of tube bundles with fluid. The current level of knowledge in this field allows to predict mainly static respectively quazi-static loading. These predictions are based on methods of comparing key vibration variables such as frequencies, amplitudes or speeds (see TEMA [1]). In this way, it is possible to determine quickly and relatively precisely the occurrence of a vibrational phenomenon, but it is not possible to quantitatively assess the effect of these vibrations on the damage of to the tube beam and to predict its lifespan, which would require the determination of the temperature field and the distribution of forces from the fluid on the beam. The aim of the work is to evaluate the-state-of-the-art, to perform a numerical simulation of the flow of fluids in the area of shell side under the inlet nozzle. Current methods of numerical analyses very well solve this problem, but at the expense of computing time, devices and expensive licences. The benefit of this work is the use of user-defined function (UDF) as a method for simulating interaction with fluid and structure in ANSYS Fluent software. This work places great emphasis on using the current state of knowledge for verifying and validation. Verifying and validation of results include, for example, experimentally measured Reynolds and Strouhal numbers, the drag coefficients and for example magnitude of pressure coefficient around the tube. At the same time, it uses the finite element method as a tool for the stress-strain calculation of a key part on tube such as a pipe-tube joint. Another benefit of this work is the extension of the graphical design of heat exchanger according to Poddar and Polley by vibration damages control according to the method described in TEMA [1]. In this section, the author points out the enormous influence of flow velocity on both the tube side and the shell side for design of the heat exchanger to ensure faultless operation. As an etalon of damage, the author chose a heat exchanger designated 104 from the Heat Exchanger Tube Vibration Data Bank [3]. With this heat exchanger, vibrational damage has been proven to be due to cutting of the tubes over the baffles. The last part outlines the possibilities and limits of further work.
|
guest ::
